Thru long hole type
Thru long hole type
Holder
| Model | Applicable Insert | min. Diameter (Ø) | Processing length (㎜) (B) | Cutting Depth (㎜) (dp) | End Length (㎜) (C) | Holder Diameter (Ø) (D) | Full length (㎜) (L) |
|---|---|---|---|---|---|---|---|
| LST2505-6 (on demand) |
LTT05-LTT06 | 25 | 150 | 3.5 | 8.5 | 25 | 380 |
| LST2707-8 | LTT07-LTT08 | 27 | 200 | 5.0 | 13.5 | 25 | |
| LST3010 -12 | LTT10-LTT12 | 30 | 6.2 | 15.7 | 25 | ||
| LST3510 -12 | LTT10-LTT12 | 35 | 5.5 | 15.7 | 30 | ||
| LST4014 -16 | LTT14-LTT16 | 40 | 7.7 | 17.6 | 33 | ||
| LST4518 -20 | LTT18-LTT20 | 45 | 11.3 | 17.5 | 35 |
Insert Tip
| Model | Keyslot Specification (㎜) | External dimensions (㎜) d × L × H |
Tolerance | ||
|---|---|---|---|---|---|
| Precision | General | Special | |||
| LTT05 | 5 | 5 × 17 × 7.5 | +0.01 ~ +0.02 |
+0.04 ~ +0.05 |
Production on order |
| LTT06 | 6 | 6 × 17 × 7.5 | |||
| LTT07 | 7 | 7 × 19 × 7.5 | |||
| LTT08 | 8 | 8 × 19 × 7.5 | |||
| LTT10 | 10 | 10 × 25 × 9.5 | |||
| LTT12 | 12 | 12 × 25 × 9.5 | |||
| LTT14 | 14 | 14 × 30 × 10 | |||
| LTT15 | 15 | 15 × 30 × 10 | |||
| LTT16 | 16 | 16 × 30 × 10 | |||
| LTT18 | 18 | 18 × 32 × 11 | |||
| LTT20 | 20 | 20 × 32 × 11 | |||
